RACERDIRECT 50 AMP FUEL PUMP RELAY KIT

Complete fuel pump Relay kit

• PUMP NOT INCLUDED 
• All the wires are 57 inches long and are 16 gauge and includes pre terminated relay mounting block and assorted terminals
• Supplies Current and Voltage Required by High Performance Fuel Pumps while maintaining lower voltage levels at the on off switch.
• 50 Amp. 5 spade terminal Relay More than enough to handle most of today’s High Performance, High Flow / High Volume Fuel Pumps,  and includes a Circuit Breaker to help protect against voltage surge that can damage you fuel pump and wiring .Circuit breaker will re-set itself..
• Includes Relay, Breaker, Wiring Harness with relay terminal block and assorted terminals and Applicable Hardware.
• Increases Consistency and Reliability and safety while allowing to keep the higher amp draw of the fuel pump out of the drivers cockpit.
• RDN racer tip: relays are very highly recommended on all electric fuel pumps, fans and electric water pumps and just about any electrical device that will draw 20 amp or higher. Most toggle switches and switch panels cannot withstand the higher amp draw of today high performance F.P ,W.P. NOS solenoids and fans and will fail. By installing the recommended relay you will accomplish 2 very important task. You insure that the switching system is not exposed to high amp requirements protecting you from having your fuel pump shut down due to a switch failing and you will protect the wiring inside the drivers cockpit as the relay only draws minimum amps in most cases 2 amps.