NECKSGEN REV2 LITE HEAD RESTRAINT SYSTEMS
At only 1.2 lbs, the all-new weight saving design makes it one of the smallest and lightest head and neck restraints on the market, giving drivers the ultimate in comfort and performance. The REV2 Lite is SFI 38.1 certified, so you can rest assured that it performs just as well as the competition. With a new integrated adjustable tether design, sizing and fitment are easier than ever. The belt channels have friction pads and high outer belt guides to help keep your shoulder harnesses in place while driving and under multiple impacts. The yokeless design of the REV product line means drivers can strap in with no extra pressure on the chest or collarbones, and the quick release helmet hardware comes included at no extra charge.
Slack Test:
Get buckled in your car as if you are ready to race and look straight ahead to the horizon. Have a helper lightly pull any slack from the tether all to one side. Pinch the tether to form a loop and measure the total length of the excess tether. This number should be 1.0-2.0 inches total (about a 1 inch pinch). This is the ideal amount of slack. If it is not 1-2 inches, contact NecksGen for an appropriate length tether for your situation. If you have a REV, tethers are available in one inch increments. If you have a REV2 Lite, simply unscrew the pin that holds the tether to the device and insert it into the appropriate slot for you. Be careful when inserting the pin that it aligns with the back hole in the slot before tightening the screw, and do not overtighten. Finger tight is adequate.
